No products
Frames
New products
-
Kortel Tandem II carrying bag
The Tandem Bag II is the most recent evolution of the pouf bag whose...
186,67 € -
Pack Paramotor Adventure Pluma Light Demo
Complete demo paramotor ready to fly and composed of\r\n\r\n1 Adventure...
0,00 € -
Weather guide - Visitors from the sky - 5th edition
A real guide to aerology for all flying people. The essential complement...
32,50 € -
SupAir rescue kit : Harness reserve handle and parachute inner container
The kit consists of a handle adapted to your harness and a pod inner...
37,50 € -
Advance rescue kit : Harness reserve handle and parachute inner container
The kit consists of a handle adapted to your harness and a pod inner...
31,67 €
The best paramotor frames are not necessarily the most robust because they also have a shock absorber (fuse) function in the event of a hard landing. The lighter is a paramotor, the less the pilot will have to manage the inertia of the whole on the ground and in flight. If a paramotor frame has all these qualities and also manages to minimize th...
The best paramotor frames are not necessarily the most robust because they also have a shock absorber (fuse) function in the event of a hard landing. The lighter is a paramotor, the less the pilot will have to manage the inertia of the whole on the ground and in flight. If a paramotor frame has all these qualities and also manages to minimize the propeller torque, it is close to perfection.
FramesThere are 38 products.
Subcategories
Miniplane frame
Miniplane paramotors frame and chassis and related parts: carrying handle, Clips, mobile sticks, calipers, pads, mounting poles, Cavalier, conical tubes hoops, nets, rings, fiberglass fittings Paramotor Miniplane
Adventure Frame
Paramotor frame of the French brand Adventure. Do not hesitate to call us if you need a part that is not available on this Internet site.
Kit Plastic Rod Fitting (4 units)
Kit of 4 plastic T connectors to connect the aluminum conical tubes to the Miniplane’s fiberglass hoop.
15,00 €Delivery time greater than 1 month. Consult usSupport plate of the manual starter
Support plate of the manual starter motor for top 80
33,33 €Delivery time greater than 1 month. Consult usKit side stick (2)
Kit of 2 aluminum conical tubes for Miniplane paramotor frame 115cm or 125cm
62,50 €Delivery time greater than 1 month. Consult usProtection Net 115 - 125
Safety net surrounding the Miniplane Frame.For Paramotor Miniplane Type 115 (cage diameter less than 130cm) or 125 (cage diameter greater than 130cm)
83,33 €Delivery time greater than 1 month. Consult usRing Kit + hooks
Set of 4 rings, 2 links, 2 rivets and 2 hooks for the paramotor Miniplane safety net tightness
10,00 €In stockKit inflation tubes
Pair of flexible tubes put in the cage for easy sail back inflation.
11,25 €Delivery time greater than 1 month. Consult usFiberglass hoop (kit)
Four fiberglass guarding hoops. Two males and two females.Cage 115cm or 125cm
35,00 €Delivery time greater than 1 month. Consult usUpper mounting hoops kit
The set consists of the upper connection and two aluminum tubes
70,83 €Delivery time greater than 1 month. Consult usPin for the launcher pulley
Pin mounted on the old guiding pulley on the starter rope of the Miniplane chassis.
2,50 €In stockGuiding pulley for the starter rope
Pulley attached to the frame of Miniplane pulley used to guide the starter rope
8,33 €In stockGuide pulley rope launcher
Attached to the frame of Miniplane pulley used to guide the starter rope
9,17 €In stockHarness Fixing tubes (2)
Tubes fixings harnesses (2)
83,33 €Delivery time greater than 1 month. Consult usFlex bar Fixation kit
Screws, nuts, springs and washers set to secure the flex bars to the frame of Miniplane
10,00 €In stockKit suspension straps
Kit of two straps to suspend the sports harness to the Miniplane flex bars.
30,00 €In stockFlex Bar
Pair of flex bar Enhanced Miniplane Sport Motor TOP 80 or Thor The attachment kit is sold separately.
166,67 €In stockSister clip hook
The Sister clip hook is used to fix the starter cord guiding pulley.
2,50 €Delivery time greater than 1 month. Consult usMiniplane frame painted
Miniplane aluminum frame with epoxy paintCage 115 or 125 Delivered naked without its accessories visible at the bottom of this page.
587,50 €Delivery time greater than 1 month. Consult usMiniplane frame painted
Miniplane Chassis stiffening backplate in aluminum with epoxy paint.
15,00 €In stockBase protective tubes chassis Miniplane
Set of 3 tubes protecting the base of the Minipolchassis base Miniplane
5,83 €Delivery time greater than 1 month. Consult usKit Plastic glides ( 2 )
Kit of two plastic glides to facilitate sliding the chassis
10,00 €In stockCarrying handle
Carrying handle for Miniplane paramotor
40,00 €Delivery time greater than 1 month. Consult usMotor Silent Block 30 x 30 mm M6
Silent blocks for assembling engine and paramotor chassis.1 silent engine block 30 x 30 mm, M6 thread
3,25 €Delivery time about 5 days. Consult usMotor Silent Block 25 x 25 mm M6
Silent blocks for assembling engine and paramotor chassis.1 silent engine block 25 x 25 mm, M6 thread
3,95 €Delivery time about 5 days. Consult usPack 40mm auto snap carabiners
Two carabiners for harness (old version) and designed for connecting the harness to the elevators
30,72 € 31,67 € -3%Reduced price!In stockCarabiners pack 30mm
2 lightweight carabiners, self-closing, Zicral designed for connection between harness and elevators with an excellent weight / strength ratio. Perfect for light harness with straps 30 mm.
32,33 € 33,33 € -3%Reduced price!In stockPack auto steel carabiners 40mm
Pack of two auto steel carabiners developed to liaise between the harness and wing.Used in acrobatic flights, tandem or paramotor flight equipped with a trolley.
42,03 € 43,33 € -3%Reduced price!In stockPack 6mm stainless steel square trapeze links
Pack of 2 square stainless Links 6 mm. Enhanced parachute or glider attachment
17,42 € 18,33 € -5%Reduced price!Delivery time about 5 days. Consult usService - aluminum with TIG welding repair
Precision welding TIG aluminum service.Repair cages, exhaust, chassis paramotor.RRP below cons.Ask us for a personalized quote by clicking here ...
33,33 €Frame for Miniplane Top80 125 with flex bar
Frame for paramotor Miniplane Flex Bars, with a 137cm cage provided for propeller 125 to 130 cm.It is assembled and adjusted at the factory The following items are not included: 1 x 12-Liter-Tank 1 x Pack Stainless steel shackle flex bar 1 x Kit aluminum calipers flex bar 1 x Kit suspension straps 1 x Motor Top80 1 x Propeller
1 400,00 €Delivery time greater than 1 month. Consult usFrame for Miniplane Top80 125 with fixed bar
Frame for paramotor Miniplane with fixed Bars, with a 137cm cage provided for propeller 125 to 130 cm.The set comes without Top80 engine and without propeller.
1 308,33 €This product is no longer soldHull NEW LOOK Miniplane
The New Look hull improves the aerodynamics of the paramotor Miniplane.
400,00 €Out of stockPack Stainless steel shackle flex bar
Stainless steel shackle lyre to connect harness to the mobile bars.
6,83 € 8,33 €Reduced price!In stockFrame foot model 2016 and more
Foot of the paramotor frame Miniplane models 2016 and more. Currently only available in black.
79,17 €In stockMiniplane frame special other motor
Miniplane aluminum frame with epoxy paint with special mounting for motors other than Top80Cage 125 Delivered naked without its accessories visible at the bottom of this page.
804,17 €Delivery time greater than 1 month. Consult usSide strap buckle
Buckle for attaching the carrying straps to the frame of the Miniplane
5,00 €Delivery time greater than 1 month. Consult us
