Pack of two auto steel carabiners...
Miniplane paramotors frame and chassis and related parts: carrying handle, Clips, mobile sticks, calipers, pads, mounting poles, Cavalier, conical tubes hoops, nets, rings, fiberglass fittings Paramotor Miniplane
Kit de 4 raccords en T phosphorescents pour relier les tubes aluminium coniques à l'arceau en fibre de verre du Miniplane.
Kit of 4 plastic T connectors to connect the aluminum conical tubes to the Miniplane’s fiberglass hoop.
Complete pack consisting of :\r\n\r\n4 Rod Fitting V2 Fluo\r\n
Kit of 2 aluminum conical tubes for Miniplane paramotor frame 115cm or 125cm
Safety net surrounding the Miniplane Frame.For Paramotor Miniplane Type 115 (cage diameter less than 130cm) or 125 (cage diameter greater than 130cm)
Set of 4 rings, 2 links, 2 rivets and 2 hooks for the paramotor Miniplane safety net tightness
Pair of flexible tubes put in the cage for easy sail back inflation.
Four fiberglass guarding hoops. Two males and two females.Cage 115cm or 125cm
Top connection Miniplane bows. Cage 115 or 125.
The set consists of the upper connection and two aluminum tubes
Pin mounted on the old guiding pulley on the starter rope of the Miniplane chassis.
Pulley attached to the frame of Miniplane pulley used to guide the starter rope
Attached to the frame of Miniplane pulley used to guide the starter rope
Tubes fixings harnesses (2)
Screws, nuts, springs and washers set to secure the flex bars to the frame of Miniplane
Kit of two straps to suspend the sports harness to the Miniplane flex bars.
Pair of flex bar Enhanced Miniplane Sport Motor TOP 80 or Thor The attachment kit is sold separately.
Kit of two aluminum calipers flex bar
The Sister clip hook is used to fix the starter cord guiding pulley.
Miniplane aluminum frame with epoxy paintCage 115 or 125 Delivered naked without its accessories visible at the bottom of this page.
Miniplane Chassis stiffening backplate in aluminum with epoxy paint.
Set of 3 tubes protecting the base of the Minipolchassis base Miniplane
Kit of two plastic glides to facilitate sliding the chassis
Carrying handle for Miniplane paramotor
4 quick clips pack for the paramotor frame Miniplane
Silent blocks for assembling engine and paramotor chassis.1 silent engine block 30 x 30 mm, M6 thread
Silent blocks for assembling engine and paramotor chassis.1 silent engine block 25 x 25 mm, M6 thread
Two carabiners for harness (old version) and designed for connecting the harness to the elevators
2 lightweight carabiners, self-closing, Zicral designed for connection between harness and elevators with an excellent weight / strength ratio. Perfect for light harness with straps 30 mm.
Pack of two auto steel carabiners developed to liaise between the harness and wing.Used in acrobatic flights, tandem or paramotor flight equipped with a trolley.
Pack of 2 square stainless Links 6 mm. Enhanced parachute or glider attachment
Precision welding TIG aluminum service.Repair cages, exhaust, chassis paramotor.RRP below cons.Ask us for a personalized quote by clicking here ...
Frame for paramotor Miniplane Flex Bars, with a 137cm cage provided for propeller 125 to 130 cm.It is assembled and adjusted at the factory The following items are not included: 1 x 12-Liter-Tank 1 x Pack Stainless steel shackle flex bar 1 x Kit aluminum calipers flex bar 1 x Kit suspension straps 1 x Motor Top80 1 x Propeller
Frame for paramotor Miniplane with fixed Bars, with a 137cm cage provided for propeller 125 to 130 cm.The set comes without Top80 engine and without propeller.
Stainless steel shackle lyre to connect harness to the mobile bars.
Foot of the paramotor frame Miniplane models 2016 and more. Currently only available in black.
Miniplane aluminum frame with epoxy paint with special mounting for motors other than Top80Cage 125 Delivered naked without its accessories visible at the bottom of this page.
Buckle for attaching the carrying straps to the frame of the Miniplane
Do not damage the paintwork of your Miniplane chassis anymore by adding this damping stop