Bluetooth intercom headset essential for tandem flights and which can be...
Complete pack consisting of :\r\n\r\n1 Paramotor Adventure Funflyer3...
Rescue parachute option, exclusively for the Adventure Funflyer3...
Option Three-wheel with aluminum rims, exclusively for the Adventure...
Selection of the most common paramotor engines
Please note : this section is incomplete. If necessary, do not hesitate to call us.
Subcategories
Parts for Vitorazzi Atom 80 engines renowned for their reliability, lightness and low consumption.
Parts for Eole 135 engines made in France by the brand Bidalot, specialist in competition engines.
Parts for the Moster 185 engine, flagship of the Vitorazzi brand.
The Tiger is a robust 22CV engine that equips the Adventure Funflyer paramotor in the 2000s. A reference in the Adventure world for its reliability, it has since been replaced by the Simonini Mini Evo or the Vittorazi Moster.
Parts for the Top 80 engine which, even if it is starting to date, has proven and is still proven in terms of reliability
Can and pods of lubricating oils for engines and paramotor reducers Per il Volo Top80, Bidalot Eole 135, Vittorazi Atom80, Moster 185 and others
Molded spark plug cap screw on the cable coil output paramotor Miniplane Top80
Silent blocks for assembling engine and paramotor chassis.1 silent engine block 25 x 25 mm, M6 thread
Spring of the throttle for Walbro engine Top80.
Starter mounting kit with steel plate + screws.
Aluminum cylinder head for paramotor engine Top80 Miniplane.
Full gearbox in oil bath (supplied without oil and without cap valved) reduction rate - Top80 | 1/3,842 (19-73)
Aluminum and Titanium Exhaust, for Top 80 Engine, comes complete with springs.
Exo paramotor gas control pack with integrated RPM counter and hour meter, assembled and ready to be mounted.
Kit silent blocks to fix the engine exhaust Tiger 3 silent engine block
The NGK B9ES spark plug, unequipped resistance, has a high heat index. It is intended for configurations pushed and especially the engine Top80.
Silent blocks for assembling engine and paramotor chassis.1 silent engine block 30 x 30 mm, M6 thread
Reinforced spring to return the throttle on Walbro
Cylinder head gasket engine paramotor Top80
Exhaust ring, size 59.7 x 5.3 located between the elbow and the muffler of the engine exhaust gasket Top 80. It reduces the unburned fuel leaks and noise.
The Exo gas control is a new generation handle, designed for paramotor pilots looking for an ergonomic system that will become the natural extension of their arms.
Tank of a liter of oil Motul 710 for 2-stroke engines Miniplane Top 80.
Tiger engine exhaust hoseLength: 60mm
Ring, spacer calibration that prevents the spark plug from touch the plunger
Combination of a carburetor gasket that fits between the carburetor and reedvalve gasket that is positioned between the valve box and the crankcase.
Set of three screws securing the ventilation turbine on the Top80 engine
Piston ring for Top 80 Miniplane Engine
Ring exhaust gasket, size 34.6 x 2.6. Located between the two elbows engine exhaust Top 80. It reduces the unburned fuel leaks.
The Caméléon is to the throttles what the smart phone to mobile phones is ... A revolution.
Transmission belt between Tiger engine and propeller.
The NGK BR9EIX Iridium spark plug improves combustion and reduces power consumption.It is designed for extensive configurations and adapted to the Top80 engine.
Top 80 engine, several times world champion, comes complete and ready to run. Remember to record the serial number of your old motor in the Customization tab.
The carburetor gasket goes between the carburetor and valve box
Piston engine paramotor Miniplane Top80- 1 piston- 1 piston pin- 2 Clips
Gasket between exhaust and engine cylinder Top 80. Reduces unburned fuel leaks.
The pilots who have chosen the V3 Cameleon gas control but who are used to version V2 can buy this kit to transform their V3 into V2.
Formula developed for the Grand Prix Vitesse Teams. Used with conventional, lead-free, and up to 124 octane fuels.All engines 2 Competition time rotating at high speeds and under heavy load lubricated by mixing: Racing competition-client bikesFor separate greasing, use MOTUL 800 2T. 2T / 4T2 TIMEQUALITY : 100% SYNTHETICSTANDARDS : APIAPI TCPACKAGING : 1L...
The valve box gasket is located between the valve box and the motor housing.
Kit consists of 3 plastic cams, 3 springs and 3 washers for engine Top80 starter.
Screw cap on top of the gear in oil bath. It incorporates a valve to prevent overpressure in the gearbox.
A tension spring for exhaust elements.Used to connect the different parts of the exhaust system mounted on the engine Top80
Plastic protection for the ignition stop button
Formula developed for the Grand Prix Motocross Teams. Used with conventional, lead-free, and up to 124 octane fuels.All engines 2 Competition time rotating at high speeds and under heavy load lubricated by mixing: Racing competition-client bikesFor separate greasing, use MOTUL 800 2T. 2T / 4T2 TIMEQUALITY : 100% SYNTHETICSTANDARDS : APIAPI TCPACKAGING :...
Three springs for the fingers of a hand launcher Top80 engine.
Bearing kit for motor reducer Top 80.Warning: Remember to specify the type of gear
The kit is composed of two springs and two nuts for engine exhaust top 80